Pilz PNOZms2p HTL - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-3
5.2 Connecting the base unit and expansion modules
5 Installation
5.2 Connecting the base unit and expansion modules 5200 Connecting the base unit and expansion modules 5- Montage_multi_Modul_verbind_rechts_BA
Connect the base unit and the expansion modules as described in the
operating manuals for the base modules.
 The terminator must be fitted to the last expansion module
 Install the expansion module in the position configured in the
PNOZmulti Configurator.
Montage_multi_Anzahl_Module_Drehzahlwaechter_BA
You can install a maximum of 4 speed monitors to the right of the base
unit.
Montage
Base unit Expansion module 1 Expansion module 8
774639: Jumper779110: Ter minator
Speed monitor
max. 4 Speed monitors