Pilz PNOZ ml1p safe link 24VDC - Manual (Page 31)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-1
8.1 Technical Details
8 Technical Details
8 8000 Technical Details Technical Details 8- 8.1 Technical Details 8100 Technical Details 8- ][Technische Daten_multi_Erweiterungsmodule
Technical details
Electrical data
Supply voltage U
B
DC 24 V
Voltage tolerance -15 %/+20 %
Power consumption at U
B
DC
without load 5.0 W
Residual ripple DC 5 %
Status display LED
Times
Switch-on delay
5.00 s
Supply interruption before de-energisation 20 ms
Max. data transmission time 35 ms
Inputs
Number of virtual inputs
32
Outputs
Number of virtual outputs
32
Environmental data
EMC
EN 60947-5-1
Vibration to EN 60068-2-6
Frequency
10 - 55 Hz
Amplitude 0.35 mm
Climatic suitability EN 60068-2-1, EN 60068-2-30, EN 60068-2-78
Airgap creepage in accordance with EN 60664-1
Ambient temperature
0 - 60 °C
-25 - 60 °C coated version
Storage temperature -25 - 70 °C
Climatic suitability 95 % r. F. coated version
Condensation permitted coated version
Mechanical data
Protection type
Mounting (e.g. cabinet)
IP54
Housing IP20
Terminals IP20
DIN rail
Top hat rail
35 x 7.5 EN 50022
Recess width 27 mm
Max. cable length between two link modules 1 km
Housing material
Housing
PPO UL 94 V0
Front ABS UL 94 V0
Cross section of external conductors with screw terminals
1 core flexible
0.50 - 1.50 mm² , 22 - 14 AWG
2 core, same cross section, flexible:
with crimp connectors, without insulating sleeve
0.50 - 0.75 mm² , 22 - 20 AWG
without crimp connectors or with TWIN crimp connectors 0.50 - 0.75 mm² , 22 - 20 AWG
2 core, same cross section, flexible:
Torque setting with screw terminals
0.25 Nm
Cross section of external conductors with spring-loaded
terminals: Flexible with/without crimp connectors 0.50 - 1.50 mm² , 26 - 14 AWG
Spring-loaded terminals: Terminal points per connection 1
Stripping length 9 mm