Pilz PNOZ ml1p safe link 24VDC - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Verbindungsmod_ml1p
The expansion module is used for the point-to-point connection of safe
virtual inputs and outputs between two base units.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul
The expansion module may only be connected to a base unit from the
PNOZmulti modular safety system.
Bestimmung/Gertebeschreibung_multi_System
The modular safety system PNOZmulti is used for the safety-related in-
terruption of safety circuits and is designed for use on:
` E-STOP equipment
` Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_Zusatz_Coated Version
The coated version of the product PNOZ ml1p is suitable for use where
there are increased environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
` Any component, technical or electrical modification to the product
` Use of the product outside the areas described in this manual
` Use of the product outside the technical details (see chapter entitled
“Technical Details”)
3.1.1 System requirements
System requirements 3- Systemvoraussetzungen PNOZ ml1p ` PNOZmulti Configurator: from Version 5.2.0
` Base unit PNOZ m0p: From Version 2.3
` Base unit PNOZ m1p: From Version 5.3
` Base unit PNOZ m2p: From Version 2.3
Please contact Pilz if you have an older version.