Pilz PNOZ m0p base unit not expandable - Manual (Page 4)

Contents
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2
Chapter 6 Commissioning
6.1 General wiring guidelines 6-1
6.2 Ethernet interfaces (only PNOZ m0p ETH) 6-2
6.2.1 RJ45 interfaces ("Ethernet") 6-2
6.2.2 Requirements of the connection cable and
connector 6-2
6.2.3 Interface configuration 6-2
6.2.4 RJ45 connection cable 6-3
6.2.5 Process data exchange 6-3
6.3 Preparing for operation 6-5
6.3.1 Function test during commissioning 6-5
6.3.2 Commissioning the PNOZmulti safety sys-
tem for the first time 6-5
6.3.2.1 Load project from chip card 6-5
6.3.2.2 Load project via integrated interface 6-6
6.3.3 Download modified project to the
PNOZmulti safety system 6-6
6.3.3.1 Load modified project from chip card 6-6
6.3.3.2 Load modified project via integrated inter-
face 6-6
6.3.4 Connection 6-7
6.4 Connection example 6-9
Chapter 7 Operation
7.1 Messages 7-1
7.1.1 Display elements for device diagnostics 7-1
7.1.2 Display elements for the Ethernet connec-
tion (only PNOZ m0p ETH) 7-2
7.2 Reset Ethernet connection settings 7-3
Chapter 8 Technical details
8.1 Technical details 8-1
8.2 Service life graph of output relays 8-5
8.3 Maximum capacitive load C (
μ
F) with load
current I (mA) at the semiconductor out-
puts
8-6
8.4 Order reference 8-7