Pilz PNOZ mml1p - Manual (Page 22)

6.2 Preparing for operation
6 Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-2
6.2 Preparing for operation 6200 Preparing for operation 6- 6.2.1 Download modified project to the PNOZmulti safety system
Download modified project to the PNOZmulti safety system 6- Verdrahtung_multi_Modul_Betr_geaend_Projekt_BA
As soon as an additional expansion module has been connected to the
system, the project must be amended using the PNOZmulti Configura-
tor. Proceed as described in the operating instructions for the base unit.
6.2.2 Connection
Connection 6- Schnittstellenbelegung_8-polig_mml1p
Betriebsbereitschaft herstellen Anschluss PNOZ mml1p
 Supply voltage
NOTICE
For the commissioning and after every program change, you
must check whether the safety devices are functioning correctly.
RJ45 socket
8-pin PIN Layout
1 CA+
2 CA-
3 CB+
4 n.c.
5 n.c.
6 CB-
7 n.c.
8 n.c.
Shield CGround
Supply voltage AC DC
8 1
24V + 24 V DC
0 V
24V
0V
0V