Vortech 2003-2004 Chevrolet SS User Manual
Page 20

2
P/N: 4GL020-015
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
08OCT08 GM Trk/H2(4GL..015v5.0)
1.
COMPONENT REMOVAL, cont’d
N. Remove the oil filler neck and cap from the
passenger’s side valve cover. Do this by
twisting in a counter-clockwise motion.
Reinstall the cap directly into the valve cover.
O. '03 and Earlier Models: Locate the breather
hose on the rear of the driver’s side valve
cover. Pull the hose and stock PCV valve
from the rubber grommet in the valve cover.
Remove the stock PCV valve from the
breather hose and install the supplied PCV
valve in its place. Reinstall the new PCV
valve with the hose attached to it into the rub-
ber grommet in the valve cover.
This manual is related to the following products: