StorCase Technology InfoStation 16-Bay 3U SCSI/SATA User Manual

Page 86

InfoStation 16-Bay RAID User's Guide - Rev. F00

StorCase Technology, Inc.

RAID Controller Configuration

5 NVRAM

Saving Configurations

CAUTION:

Any changes made in this menu will permanently erase data on disks! RAID
controller should be offline before any configuration changes are made.

NOTES:

The RAID controller must be restarted for any configuration changes (in Quick
Setup, RAID Params, and SCSI Params) to take effect.

Configuration changes in RS232 Params, System Params, and RAID Funcs do
not require a restart of the RAID controller.

5 NVRAM

5.1 Update

NVRAM

5.2 Erase

NVRAM

5.3 Restart

Yes / No

NVRAM Menu

5.1 Update NVRAM

Select Yes or No (default). Select Yes to store latest configuration settings in NVRAM.

5.2 Erase NVRAM

Select Yes or No (default). Select Yes to clear contents of NVRAM and restore configuration
defaults.

5.3 Restart

Select Yes or No (default). Select Yes to restart the RAID controller.

This manual is related to the following products: