StorCase Technology InfoStation 16-Bay 3U SCSI/SATA - Manual (Page 40)

InfoStation 16-Bay RAID User's Guide - Rev. F00 StorCase Technology, Inc.
RAID Controller Configuration 27
6. After the array is created, insert any disks for use as spares.
7. Once setup is complete:
• If multiple partitions are required, proceed to section "Partitions" on page 30 of
this User's Guide.
• If no additional partitions are required, proceed to section "LUN Mapping" on
page 36 of this User's Guide.
Confirm that all settings are correct and click the Update button located on the
RAID Creation screen (Figure 11).
Any disks not included in the array will automatically be added as spares.
Figure 11: Data Master RAID Creation Screen
(Example shown, actual screen may vary)