StorCase Technology InfoStation 16-Bay 3U SCSI/SATA - Manual (Page 59)

46 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 16-Bay RAID User's Guide - Rev. F00
Partitions
NOTE: Please familiarize yourself with the following information before proceeding
to section "Setting Up Multiple Partitions" on page 47.
Partitions Greater than 2TB
If creating a RAID array larger than 2TB in total capacity, two (2) partitions will be created.
1. Partition 1 will be approximately 2TB.
2. Partition 2 will be the remaining capacity beyond 2TB (unless otherwise specified).
3. If equal partitions are desired, change Slice 01 to capacity = 0GB. Once Slice 01
capacity is changed, change Slice 00 to desired capacity.
You are now ready to proceed to section "Viewing Default Partition Configuration".
VIEWING DEFAULT PARTITION CONFIGURATION
1. to the Menu (left) side of the screen and press .
2. Enter password (default password = 00000000).
3. Select RAID Funcs. Press .
4. Select Statistics. Press .
5. to the Output (right) side of the screen and press .
6. Scroll up to the "RAID Statistics" section to view Partition values.