Typical fibre channel configurations – StorCase Technology InfoStation 16-Bay 3U SCSI/SATA User Manual
Page 29

16
FC Configurations
StorCase Technology, Inc.
InfoStation 16-Bay RAID User's Guide - Rev. F00
TYPICAL FIBRE CHANNEL CONFIGURATIONS
(FC-to-SATA version only)
CAUTION:
DO NOT bend the LC (optical) cable beyond the cable's minimum bend radius,
data transmission degradation may occur. Follow cable manufacturer's
guidelines for bend radius limitation.
WARNING:
DO NOT look directly into the open end of an active LC (optical) cable or optical
SFP module (with plugs removed)! Serious eye damage can occur from direct
exposure to the infrared light!
NOTES:
The configuration and use of the InfoStation RAID Controller requires a certain
level of expertise and experience on the part of the user/integrator. Since there
are many configuration options and variables (ie. host platforms, applications,
etc.), only general guidelines will be discussed in this User's Guide.
LC (optical) SFP Modules support both 2Gbps and 1Gbps operation.
Up to three (3) InfoStation enclosures can be daisy-chained together.
Figure 7A: Typical Dual FC Loops Connection to InfoStation
(S10K109 shown)
VT-100/ANSI Terminal
(via HyperTerminal
or Data Master)
External
Modem
To
FC-AL
(Loop A)
To
FC-AL
(Loop B)
InfoMon