StorCase Technology InfoStation 16-Bay 3U SCSI/SATA - Manual (Page 76)

InfoStation 16-Bay RAID User's Guide - Rev. F00 StorCase Technology, Inc.
RAID Controller Configuration 63
2.3.2 SAN Mapping
This function enables the user to map individual LUNs to a specified host, thereby limiting
access to certain slices to single hosts (even in dual host confgurations).
2.3.2.1 Port 1
Hit Enter to proceed to 2.3.2.1.1 - 2.3.2.1.8 Select Host.
2.3.2.1.1 - 2.3.2.1.8 Select Host
Select Host 1 - Host 8, then select LUN (0-7). Select Yes or No to confirm selection.
2.3.2.2 Port 2
Hit Enter to proceed to 2.3.2.2.1 - 2.3.2.2.8 Select Host.
2.3.2.2.1 - 2.3.2.2.8 Select Host
Select Host 1 - Host 8, then select LUN (0-7). Select Yes or No to confirm selection.
2.3.3 Edit WWN Table
This function enables the user to enter individual host WWNs to the RAID controller.
2.3.3.1 - 2.3.3.8 Select Host
Select Host 1 - Host 8 and enter WWN value (default = 0000000000000000).
2.3.4 View WWN Table
This function enables the user to view a list of host WWNs in the Monitor Utility (cannot be
viewed from the control panel).