StorCase Technology InfoStation 16-Bay 3U SCSI/SATA User Manual
Page 42
InfoStation 16-Bay RAID User's Guide - Rev. F00
StorCase Technology, Inc.
RAID Controller Configuration
29
Figure 13: Data Master Create Array Screen
(Example shown, actual screen may vary)
2.
Select the desired Array number in the "Select Array" section.
3.
Select the desired RAID level in the "Select RAID Level" section.
4.
Select the desired stripe size in the "Stripe Size" field.
5.
Select either Random or Sequential in the "Select Performance" section.
6.
If any partition in any of the arrays is over 2TB capacity:
a.
Select Enable in the "Larger Than 2TB" section.
b.
Select the desired sector size in the "Sector Size" section. Partition sector size
depends on the OS.
7.
Select the quantity of disks for creating the Array in the "Number of Disk Drives" field.
Selected disks will display in both the "List" and "Physical View" sections.