StorCase Technology InfoStation 16-Bay 3U SCSI/SATA - Manual (Page 109)

96 Appendix B - Optional Accessories
StorCase Technology, Inc. InfoStation 16-Bay RAID User's Guide - Rev. F00
InfoStation Monitoring Utility (InfoMon ® )
InfoMon is a web-based monitoring utility that runs under the Windows O/S. This free utility
(and its accompanying User's Guide) is available for download at the StorCase web site
(http://www.storcase.com).
The primary purpose of InfoMon is to continuously monitor the environmental status and
indicate alarm conditions inside the InfoStation chassis via a serial connection to a PC. InfoMon
also provides the User the ability to easily configure both device and chassis settings with
a few clicks of the mouse!
In addition, InfoMon allows the User to monitor the statuses and temperatures of individual
InfoStation modules and drive bays, etc., and can provide "real-time" updates via an Internet
connection. With the recent addition of the InfoMon Call Home
® feature, this information can
also be sent to a specific site for access by StorCase technical support staff in order to assist
with system troubleshooting. The Call Home feature also provides the ability to set-up a paging
function for notification of environmental alarm or warning conditions.
To install and operate the InfoMon software, the computer system must meet the following
requirements:
Operating System: Microsoft ® Windows ® 95/98/NT/2000/XP
CPU: IBM-compatible 486 or higher
M e m o r y : 32MB RAM
Hard Disk Space: 12MB
Internet Connection: Required only if monitoring via the web
Internet Browser: Microsoft Internet Explorer 5.0 (or higher) or
Netscape Communicator 4.7 (or higher)