StorCase Technology DS570 - Manual (Page 48)

DS560/DS570 User's Guide - Rev. A04 StorCase Technology, Inc.
Configuration 39
Starting the Monitor Utility
NOTES: Microsoft ® Windows ® 3.x and Windows ® NT™ 3.5x include a program
called Terminal which does not support ANSI color. If using either O/S,
select VT-100 for terminal emulation or use a third-party software program
such as Procomm for Windows.
Microsoft
® Windows ® 95/98/NT/2000 includes a program called Hyper-
Terminal that supports ANSI color.
The Monitor Utility is implemented with a VT-100 or ANSI terminal connected through the DB9
port on the rear of the DS570 chassis (Figure 14). This utility is embedded in the firmware;
software loading is not required unless for upgrade purposes.
To find HyperTerminal in Windows:
1. Click on Start (normally located at the bottom left of the Windows desktop)
2. Go to Programs
3. Go to Accessories
4. Go to HyperTerminal
Figure 14: DB9 Port Location
Host Ch. 1
Host Ch. 2
DB9 Connector
(RS-232)
DB9 Connector
(MODEM)
S_IDE09