StorCase Technology DS570 - Manual (Page 45)

36 Configuration
StorCase Technology, Inc. DS560/DS570 User's Guide - Rev. A04
RAID Funcs Menu
NOTE: Any changes made to 61 Format Disk, 62 Init RAID, and 63 R5 Check will per-
manently erase any data on disks!
Sub-Menu Settings/Options Default
61 Format Disk
611 Format Disk1 Stop/Start Stop
612 Format Disk2 Stop/Start Stop
613 Format Disk3 Stop/Start Stop
614 Format Disk4 Stop/Start Stop
615 Format Disk5 Stop/Start Stop
616 Format Disk6 Stop/Start Stop
617 Format Disk7 Stop/Start Stop
618 Format Disk8 Stop/Start Stop
Use to low level format the disks. This option is only available when the RAID Controller is
unconfigured. Low level formatting is not mandatory, since most new disks do not require
low level formatting. Use only if disk is having problems.
62 Init R5/R3 Stop/Start Stop
Use to configure a disk group for RAID 3 or 5. This is automatically done during the initial
configuration of R5/R3.
63 R5/R3 Check Stop/Start Stop
Use to verify the R5/R3 configuration. This option should be performed during the initial
configuration of R5/R3.
64 Beeper Clear, Enable/Disable Enable
Use to enable/disable the audible alarm.