SOR Multi Point RF Level Switch - Manual (Page 7)

Form 677 (05.13) ©SOR Inc. 7/36
Probe Tip Termination Notes
For sheath probes, the last inch of the rigid probe is inactive.
The flexible probes terminate with inactive 316SS weights. The weights are insulated
from the probe, and 3/4-16 UNF threads are provided for connection to locally provided
anchoring hardware.
Step 1 At maximum level adjust probe span.
Step 2 At uppermost set point level adjust set point.
Step 3 At second set point level adjust set point 2.
(If applicable)
Step 4 At third set point level adjust set point 3.
(If applicable)
Step 5 At fourth set point level adjust set point 4.
(If applicable)
Combine At uppermost set point level adjust probe span.
Step 1 & 2 Then: adjust set point 1.
Step 3 At second set point level adjust set point 2
(If applicable)
Step 4 At third set point adjust set point 3.
(If applicable)
Step 5 At fourth set point adjust set point 4.
(If applicable)
Inactive portion
of probe above
probe span
Uppermost set point
Probe Span
Set points can
be position only
within span
Resolution
100%
80%
60%
40%
20%
0%
Maximum level
Probe Span
Set points can
be positioned
anywhere within
span without
resetting
probe span
100%
90 %
80%
70%
60%
50%
40%
30%
20%
10%
0%
Resolution