SOR 503FR Fixed Range Pressure Transmitter - Manual

Form 963 (03.13) ©SOR Inc. 1/4
Calibration
The transmitter is fixed range and supplied factory calibrated. If it is desired to verify
calibration prior to installation, attach the transmitter to a pressure source capable of
adjustment throughout a specified range. If outputs are not within limits at factory
calibration conditions, 77
o F (25 o C), the device should be returned to the factory.
The 503FR Fixed Range Pressure Transmitter is a loop powered, solid state
instrument designed for accurate and reliable pressure measurement. The
transmitter uses a high-performance ceramic sensor and a stainless steel
process connection for compatibility with many types of process fluids
requiring continuous monitoring.
503FR Fixed Range
Pressure Transmitter
General Instructions
Registered Quality System to ISO 9001
NOTE: If you suspect that a product is defective, contact the factory or the
SOR
® Representative in your area for a return authorization number (RMA).
This product should only be installed by trained and competent personnel.
Operation
Once the transmitter is installed and wired into a control or display loop,
it is ready for use. Before applying power, check that the polarity and
excitation voltage are correct.
Design and specifications are subject to change without notice.
For latest revision, go to www.sorinc.com
e
Instructions