Linksys WRVS4400N - Manual (Page 84)

WRVS4400N User Guide 78
QoS Tab
Setting Up and Configuring the Router
Enable—Check this box to enable this Rate Control Rule.
Add to list—After a rule is set up, click this button to add it to the list. The list can contain a
maximum of 15 entries.
Delete selected application—Click this button to delete a rule from the list.
Priority Screen
Service—Select the service from the drop-down menu. If it does not contain the service you
need, click Service Management to add the service.
Direction—Select Upstream for outbound traffic or Downstream for inbound traffic from the
drop-down menu.
Priority—Select High, Medium, Normal, or Low priority for the service. The default is Medium.
Enable—Check this box to enable this Priority Rule.
Add to list—After a rule is set up, click this button to add it to the list. The list can contain a
maximum of 15 entries.
Delete selected application—Click this button to delete a rule from the list.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen, and click More for additional details.