Linksys WRVS4400N - Manual (Page 26)

WRVS4400N User Guide 20
Placement Options
Connecting the Router
5. Power on the cable or DSL modem and the other network device if using one.
6. Connect the included AC power cable to the Router’s Power port on the side of the Router,
and then plug the power adapter into an electrical outlet.
The Power LED on the front panel will light up as soon as the power adapter is connected
properly.
Placement Options
There are three ways to place the Wireless-N Router. The first way is to place it horizontally on a
surface, so it sits on its four rubber feet. The second way is to stand the Wireless Router
vertically on a surface. The third way is to mount it on a wall. The stand and wall-mount options
are explained in further detail below.
Stand Option
1. Locate the Router’s left side panel.
2. The Router includes two stands. With the two large prongs facing outward, insert the short
prongs into the little slots in the Router, and push the stand upward until it snaps into place.
Repeat this step with the other stand.