Vpn setup wizard – Linksys WRVS4400N User Manual
Page 122
WRVS4400N User Guide 116
Running the VPN Router Software Wizard
VPN Setup Wizard
2. Enter the required data in the Configure VPN Tunnel screen and then click Next to continue.
•
Router 1 User Name: Enter the user name of the Router 1.
•
Router 1 Password: Enter the password of the Router 1.
•
Router 2 User Name: Enter the user name of the Router 2.
•
Router 2 Password: Enter the password of the Router 2.
•
Tunnel Name: Enter a name for this tunnel.
•
Pre-shared Key: IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both
character and hexadecimal values are acceptable in this field; e.g.,“My_@123” or
“0x4d795f40313233”. Note that both sides must use the same
Pre-shared Key.
•
Router 1 WAN IP address: Enter the WAN IP address of the router 1.
•
Router 1 IP by DNS Resolved: Enter the DDNS Domain Name of router 1 if it does not have
a static IP address for its internet connection.
•
Router 2 WAN IP address: Enter the WAN IP address of the router 2.
•
Router 2 IP by DNS Resolved:Enter the DDNS Domain Name of router 2 if it does not have
a static IP address for its internet connection.