Linksys WRVS4400N - Manual (Page 159)

WRVS4400N User Guide 153
Specifications
WRVS4400N v2 Specifications
Model WRVS4400Nv2
Standards Draft IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
802.1X (Security Authentication), IEEE802.1Q (VLAN), 802.11i
(Security WPA2), 802.11e (Wireless QoS), IPv4 (RFC791), IPv6
(RFC2460), RIPv1 (RFC1058), RIPv2 (RFC1723)
Ports Ethernet, Power
Buttons Reset
Cabling Type UTP Cat 5e or better
LEDs Power, Diag, IPS (blinks RED - Internal attack,
blinks Green - external attack), Wireless, LAN 1-4, Internet
Operating System Linux
Radio Transmit
Power 11b: 18dBm+/- 1.5dbm
11g: 17dBm+/- 1.5dbm
11n: 16.5Bm+/- 1.5dbm
Receiver Sensitivity 11.b: 11Mbps@ -85dBm
11.g: 54Mbps@ -70dBm
11.n: 270Mbps@ -65dBm
Active WLAN
Clients Up to 64 Clients
Wireless Securities WEP, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-
Enterprise
Antenna 3 (Omnidirectional), Gain in dBi is 1.8.
NAT Throughput Up to 800 Mb/s when IPS is disabled
WebUI Built in Web UI for Easy browser-based configuration (HTTP/HTTPS)
SNMP Version SNMP Version 1, 2c
Event Logging Event Logging: Local, Syslog, E-mail Alerts
Web F/W upgrade Firmware Upgradable Through Web-Browser
Diagnostics DIAG LED for Flash and RAM failure; Ping Test for network
diagnostics