FeiYu Tech FY-41AP - Manual (Page 31)

GuiLin FeiYu Electronic Technology Co., Ltd. http://www.feiyudz.cn E-mail: [email protected]
Page 30
(8) Press the „Read ALL‟ button:
(9) After making your setting changes, remember to press the „Save‟ button
to update the FY41AP flash memory.
(10) CHANGING STABILIZATION GAIN:

Each channel (Aileron, Elevator, Throttle, Rudder) gain can be adjusted
individually.

Gain controls the sensitivity of Auto Stabilization, with a range of „0‟
(zero) for no stabilization, to „100‟ for maximum stabilization.

Note that too low gain results is poor auto stabilization, too high
gain will cause oscillations of the aircraft.

Adjust your aircraft gain setting from the lowest gain and increase it
until stabilization is optimum. Never carry out your first test
flight at maximum gain. Aircraft oscillations can lead to crash.

Remember to press the „Set‟ button to save your updated gain setting.
(11) CONFIGURATION FUNCTION:
Init GYRO
 Use the „Config‟ function for gyro re-set / initialization.
 During gyro re-set don‟t move the FY41AP.