FeiYu Tech FY-41AP - Manual (Page 22)

GuiLin FeiYu Electronic Technology Co., Ltd. http://www.feiyudz.cn E-mail: [email protected]
Page 21
SWITCH CHANNEL SETTING
a) FY-41AP needs two 3 way-switches to control its
flight modes ：

SW1 is used to select either manual mode,
stabilized mode & 3D mode.

SW2 is used to set Auto Return To Launch
Mode, Fixed altitude & Heading lock flight
Mode &
Auto Circling Mode.
b) SW2 function had priority over the SW1. Only when SW2 switch to cancel
(Null) position can the SW1 switch work.
c) After programming your radio switches (SW1 and SW2), please observe the
LED Flashes to confirm correct mode setting.
SW1 DEFAULT SETTING STATE
POSITION 1 2 3
servo signal output 900 ～1200US 1200~1800US 1800~2100US
Function Manual Mode Stabilized Mode 3d Mode
LED
SW2 DEFAULT SETTING STATE
Position 1 2 3
servo signal
output
900 ～1200US 1200~1800US 1800~2100US
Function
fixed altitude &
heading lock mode
NULL
Auto Return To
Launch Mode
LED
Other function can be set to the SW2 via FY-41AP setting software.