EXFO PSO-100 Series Optical Sampling Oscilloscopes - Manual (Page 89)

Optical Sampling Oscilloscope 81
5 Maintenance
To help ensure long, trouble-free operation:
³
Always inspect fiber-optic connectors before using them and clean
them if necessary.
³
Keep the unit free of dust.
³
Clean the unit casing and front panel with a cloth slightly dampened
with water.
³
Store unit at room temperature in a clean and dry area. Keep the unit
out of direct sunlight.
³
Avoid high humidity or significant temperature fluctuations.
³
Avoid unnecessary shocks and vibrations.
³
If any liquids are spilled on or into the unit, turn off the power
immediately, disconnect from any external power source and let the
unit dry completely.
There are no operator serviceable parts inside the unit. Please refer all
servicing to EXFO personnel.
³
The unit has a fan for active cooling. Make sure there is sufficient
airflow to cool the device, any objects that cover the ventilation holes
must be removed.
³
Do not apply too large torque when connecting the clock input. Use a
torque wrench.
³
The instrument is somewhat temperature sensitive during the start
procedure. Avoid placing the unit in a hot cabinet.
W
ARNING
Use of controls, adjustments, and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.