EXFO PSO-100 Series Optical Sampling Oscilloscopes - Manual (Page 111)

Optical Sampling Oscilloscope 103
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at www.exfo.com.
PSO-101 PSO-102
Number of channels 1 2
Wavelength range (nm) b C: 1525/1563
L: 1575/1608
Optical bandwidth (GHz) •500
Polarization dependence (dB) ˜1
Timing jitter (fs) c ˜100, 50 b
Signal sensitivity (mW) b, d 2
Power uncertainty (dB) 1
Maximum input peak power without damage (mW) 200
Maximum input average power without damage (mW) e 100
Minimum signal duty cycle without external clock (%) 1
Frequency holes due to asynchronous sampling (%) ˜1
External clock frequency range (GHz) 0.001 to 12.5
External clock input level at 10 GHz (V) 0.8 to 2
External clock duty cycle (%) •10, ˜90
Connectors
fiber input
FC/PC
external clock SMA
GENERAL SPECIFICATIONS
Weight 4.7 kg (10.3 lb) 5.5 kg (12.1 lb)
Size (H x W x D) 128 mm x 238 mm x 373 mm
(5 in x 9.4 in x 14.7 in)
Temperature
operating
18 ºC to 28 ºC (64 ºF to 82 ºF)
storage 0 ºC to 50 ºC (32 ºF to 122 ºF)
Power consumption (V4) 20
Notes
a. At 1550 nm.
b. Typical.
c. Timing jitter measurement depends on the signal SNR and slope rise time.
d. Peak power required to obtain 10 dB OSNR.
e. Input contact may be damaged if contacts are dirty.
SAFETY
21 CFR 1040.10 and IEC 60825-1:2007
CLASS 1 LASER PRODUCT