beautypg.com

EXFO FVA-3150 Variable Attenuator User Manual

Page 45

background image

Operating Your Variable Attenuator

Variable Attenuator

39

Performing an Attenuation Routine

Switch to –11 dB attenuation for 10 seconds (step 1)

Switch to –12 dB attenuation for 10 seconds (step 2)

Switch to –13 dB attenuation for 10 seconds (step 3), and

Return to the initial attenuation state (-10 dB) for 10 seconds (step 0)
and repeat the routine until you stop it

To program the attenuation routine:
1.
Press the Program button.

2. Press ENTER. The first digit will start flashing. Use the up/down arrows

to change the flashing digit and the left/right arrows to activate the next
digit.

Hours

Seconds

Minutes