EXFO FVA-3150 Variable Attenuator - Manual (Page 25)

Setting Up Your Variable Attenuator
Variable Attenuator 19
Managing the Wavelength Shortlist
To delete a wavelength from the shortlist:
1. Press the Setup button.
2. Press the left/right arrows until LAMBDA is displayed.
3. Use up/down arrows to move until the wavelength you want to delete
appears in the lower portion of the display.
4. Press ENTER. The wavelength will start flashing.
5. Set all the wavelength digits to zero. To do so, use the up/down arrows
to change the flashing digit and the left/right arrows to activate the next
digit.
6. Press ENTER.
7. To exit the Setup menu, press the Setup button.
To delete all wavelengths from the shortlist:
1. Press the Setup button.
2. Press the left/right arrows until LAMBDA is displayed.
3. Press the up/down arrows until DEL ALL appears in the lower portion
of the display.
4. Press ENTER.