EXFO FVA-3150 Variable Attenuator - Manual (Page 38)

Setting Up Your Variable Attenuator
32 FVA-3150
Saving and Recalling a Configuration
To save a configuration:
1. Customize the Variable Attenuator as required.
2. Press the Setup button.
3. Press the left/right arrows until SAVE is displayed.
4. Press ENTER. The configuration number will start flashing.
5. Press the up/down arrows to modify the configuration number.
6. Press ENTER.
7. Press the Setup button to exit the menu.
Once you have saved a configuration (see Saving and Recalling a
Configuration on page 31), you can recall it at any time.
Configuration number