EXFO FLS-2200 Broadband Source - Manual (Page 83)

Troubleshooting
Broadband Source 75
Error Messages
-79 EEPROM access error:
A problem occurred when
accessing the EEPROM memory
(read or write).
Contact EXFO for assistance.
100 No more room in the command
pipe:
A command could not be added
to the command pipe.
If problem persists, contact EXFO
for assistance.
101 Timeout error:
The command request was not
performed in the set time amount.
Contact EXFO for assistance.
102 Runtime error:
The command was not performed
by the unit due to a runtime error.
Contact EXFO for assistance.
103 Invalid response:
A command has triggered an
invalid response from the unit.
Contact EXFO for assistance.
200 Decompression error:
An error occurred while
decompressing the software.
Contact EXFO for assistance.
32244 Floating exception:
There is an overflow while running
a command.
Restart your unit to solve the
problem.
32245 Stack overflow:
Not enough RAM to run the
command.
Restart your unit to solve the
problem.
32246 Abort called in firmware:
The unit used a command which
it is not intended to.
Restart your unit to solve the
problem.
Number Description Recommended Action