EXFO FLS-2200 Broadband Source - Manual (Page 168)

SCPI-Based Errors
160 FLS-2200
–260 “Expression error” Indicates that an expression program data element
related error occurred. This error message should
be used when the device cannot detect the more
specific errors described for errors –261 through
–269.
–261 “Math error in
expression”
Indicates that a syntactically legal expression
program data element could not be executed due
to a math error; for example, a divide-by-zero was
attempted. The definition of math error is
device-specific.
–270 “Macro error” Indicates that a macro-related execution error
occurred. This error message should be used
when the device cannot detect the more specific
errors described for errors –271 through –-279.
–271 “Macro syntax error” Indicates that a syntactically legal macro program
data sequence, according to IEEE 488.2, 10.7.2,
could not be executed due to a syntax error within
the macro definition (see IEEE 488.2, 10.7.6.3.)
–272 “Macro execution
error”
Indicates that a syntactically legal macro program
data sequence could not be executed due to some
error in the macro definition (see IEEE 488.2,
10.7.6.3.)
–273 “Illegal macro label” Indicates that the macro label defined in the *DMC
command was a legal string syntax, but could not
be accepted by the device (see IEEE 488.2, 10.7.3
and 10.7.6.2); for example, the label was too long,
the same as a common command header, or
contained invalid header syntax.
–274 “Macro parameter
error”
Indicates that the macro definition improperly
used a macro parameter placeholder (see IEEE
488.2, 10.7.3).
Error
Number
Description Probable Cause