EXFO FLS-2200 Broadband Source - Manual (Page 65)

Using Your Broadband Source in an Automated Test Environment
Broadband Source 57
Using the EXFO Getting Started Applications
The detail of this sub VI gives precious information on how to call an
instrument driver VI.
To use a Getting Started application:
1. Turn on the computer and ensure that all the remote-control
parameters are set correctly.
2. Open the desired Getting Started application and run it from LabVIEW.
3. From the application’s Front Panel, set the communication parameters.
For information on communication parameters, see Working with
EXFO LabVIEW Drivers on page 52.
4. Once the parameters are configured, click Initialize Communication.
5. Using the provided buttons and controls, perform the desired actions.
Instrument driver VI