EXFO FLS-2200 Broadband Source - Manual (Page 148)

IEEE 488.2 and Specific Command Reference
140 FLS-2200
Product-Specific Commands—Description
:SOURce[1..n]:CURRent[:LEVel]
[:IMMediate][:AMPLitude]
Description This command sets the source's current level.
This value can be set even if the source is off.
At *RST, the current level is device-dependent.
Syntax :SOURce[1..n]:CURRent[:LEVel][:IMMediate][:A
MPLitude]A]>|MAXim
um|MINimum
Parameter(s) Current:
The program data syntax for is
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> element is A. The
special forms MINimum and MAXimum are
accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
The parameter is the new source
current drive, in amperes (A).