EXFO FLS-2200 Broadband Source - Manual (Page 120)

IEEE 488.2 and Specific Command Reference
112 FLS-2200
IEEE 488.2 Commands—Description
IEEE 488.2 Commands—Description
*CLS
Description The *CLS command clears the Standard Event
Status Register and the Error/Event Queue.
Syntax *CLS
Parameter(s) None
*ESE
Description The *ESE command sets the Standard Event
Status Enable Register bits, as defined in the
table below. This register contains a mask value
for the bits to be enabled in the Standard Event
Status Register.
Syntax *ESE
Parameter(s) RegisterValue:
The program data syntax for is
defined as a
DATA> element.
The , expressed in base 2,
represents the bit values of the Standard Event
Status Enable Register.
LSB
OPC N.U. QYE N.U
MSB Standard Event Status Enable Register
DDE PON CME EXE N.U EXE DDE