EXFO MaxTester DSL - Manual (Page 43)

MaxTester DSL 37
7 Saving and Reading Test
Results
Save Results
You can save a snapshot of test results into a result file during or after a test
performed with the MaxTester DSL. Each Auto Test, xDSL, and Ethernet test includes
a Save Results tab to do so.
When a test is completed or stopped, a Confirm Save Results dialogue box pops
up. Selecting Yes displays the Save Results screen where the following information
can be entered:
³
File Name opens an editor screen where you can
enter a desired file name.
³
Save button saves the results in binary format for the
test executed.
³
Export Format generates results of a pre-executed
test in the following formats:
³
binary
³
HTML
³
XML
³
Export File Name opens an editor screen where you
can enter a desired export file name.
³
Export button sends the results, in the selected
format, to a USB key. If more than one USB key is
attached to the device, you’ll be asked to select one
from a list of all USB keys attached to the unit.
Note: If the test is still running (not completed or stopped), only the first two
fields are available and the results are saved to binary format.
To save or export results:
1. Press the up/down arrows to select the desired parameter.
2. Press the left/right arrow keys to view and select the options,
Or
3. Press to open the on-screen keyboard. to enter or edit a File Name.
4. Press the up/down left/right arrows to navigate the on-screen keyboard.
5. Select the desired function key to complete your selection.
6. Select Save or Export buttons and press
to confirm your selection.