EXFO MaxTester DSL - Manual (Page 22)

Configuring the MaxTester DSL Test Set 16
5 Configuring the
MaxTester DSL Test Set
Test Configuration
The MaxTester DSL supports 3 types of test applications: Auto Test, xDSL Test, and
Ethernet Test. Configuration parameters for all 3 test applications are saved into a
test configuration profile. A default profile is provided with a predefined set of
parameters for all test applications.
³
Select Profile lists saved available profiles. The
current active profile is shown in the upper
information header. At power up, settings are read
from the last loaded profile.
³
Profile Details lists the 3 types of tests for
configuration:
³
Auto Test Setup
³
xDSL Test Setup
³
Ethernet Test Setup
³
Factory Default resets system profiles to factory
default settings. Currently selected profiles, other than
system profiles, are not affected.
³
Clone Profile allows you to create a new profile by
copying all parameters from the currently loaded
profile.
³
Import Profile allows you to copy all profiles from external USB key to the unit.
³
Export to USB allows you to copy all profiles to USB key.
Setup Profile Name
This alphanumeric editor screen allows you to change
parameter values and save changes to a new profile.
To use the editor screen:
1. Press the up/down left/right arrows to navigate the
on-screen keyboard.
2. Press to confirm the selection.