EXFO MaxTester DSL - Manual (Page 19)

MaxTester DSL 13
³
For the time format, auto daylight saving and time zone values, use the
arrow keys to select the desired value, then press
to confirm the
change.
Power - Battery Status
The BATTERY Status pane indicates the current power
level for the battery.
Note: The battery level might not display after a
system upgrade but will become available
again after the next full charge.
Power Schemes
You can set your unit to automatically switch to suspend mode independently for
the battery or AC power modes. This is useful for example if you want to save
battery power but do not want to be hindered by unwanted switches between
modes when using AC power.
³
Power off completely shuts down the unit’s power.
³
Power suspend puts the unit in sleep mode; you can
wake up the system by pressing power on/off
button.
³
Modem power off:
³
Immediately for when an xDSL test is completed
or stopped. In this mode, the modem is powered
on when xDSL test starts.
³
Timeout value powers off the modem within a
defined period after an xDSL test is completed or
stopped.
To change the power management settings:
1. Press ,
select System, and then Power.
2. Select the Power Schemes tab.
3. Under DC In or Battery, use the arrow keys to select power off on system idle or
suspend timeout modes, then press to view the list of available choices.
4. Select a new value, then press to confirm the choice. Repeat for the other
modes as needed.