EXFO MaxTester DSL - Manual (Page 10)

Introducing the MaxTester DSL Test Set 4
Caring for the MaxTester DSL
The MaxTester DSL has been designed to be a rugged and lightweight piece of test
equipment. However, the unit should be kept away from extremes of heat, cold,
moisture, and dust. Failure to do this may shorten the life of the instrument.
The MaxTester DSL LCD display should only be cleaned using a soft, lint-free cloth
and an anti-static cleaning solution. Ordinary detergents and other cleaning
solutions may cloud or scratch the surface and should be avoided.
Using the MaxTester DSL
The MaxTester DSL is rated IP54 which means that it is not affected by dust or water
splashing against the enclosure from any direction. This protection is only valid
when both side doors are properly closed. If the equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be
impaired.
The MaxTester DSL is equipped with a series of interfaces shown in the following
views:
³
Front
³
Left
Speaker
Battery LED
Power LED
USB Host Port
2 USB Client Ports
SD Card (not used)
Head Set Jack (2.5 mm) (not used)
Door