Eurocom D90xC PHANTOM-X - Manual (Page 92)

Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive(s)
6
Upgrading the Hard Disk Drive(s)
The hard disk drive(s) can be taken out to accommodate other 2.5" serial (SATA)
hard disk drives with a height of 9.5mm (h) (see
“Storage Options” on page C - 4 ).
Follow your operating system’s installation instructions, and install all necessary
drivers and utilities (as outlined in
“Drivers & Utilities” on page 4 - 1 ), when setting
up a new hard disk.
Removing the Hard Disk(s) in the Primary HDD Bay
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws - .
3. Remove the bay cover .
HDD System Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 2
HDD Bay Cover
Removal
1 4
5
1
3 2
4
5