Eurocom D90xC PHANTOM-X - Manual (Page 112)

Modules
7 - 6 Setting Up SATA RAID or AHCI Modes
7
10. This will now return to the main menu.
11. Select 4.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. As the computer starts up, press a key when you see the message "Press any
key to boot from CD".
13. Press Enter to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
14. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual
DVD-ROM as per Table 4 - 1, on page 4 - 3 (make sure you install the Intel Matrix
driver - see “Intel Matrix Driver Installation” on page 7 - 7 ).
Figure 7 - 2
RAID Created
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
ID Name Level Strip Size Status Bootable
0 My RAID RAID1(Mirror) N/A 55.9GB Normal Yes
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 FUJITSU MHV2040B NW56T5C25FAF 93.2GB Member Disk(0)
1 FUJITSU MHT2060B NR0UT52256W7 55.9GB Member Disk(0)
Intel(R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R wRAID5
Copyright (C) 2003-06 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
[ ]-Select [ESC]-Exit [ENTER]-Select Menu