Eurocom D90xC PHANTOM-X - Manual (Page 181)

Windows XP Information
Video Features D - 9
D
Display Devices & Options
Besides the built-in LCD, you can also use an external VGA monitor (CRT)/external Flat Panel Display or
TV as your display device. A VGA monitor/Flat Panel Display connects to the DVI-Out port or external monitor
port; a TV to the S-Video-Out jack.
The following display modes are available.
Table D - 2 - Display Options
Display Mode Description Note
Single Display Mode Only one of your displays is used.
Note that SLI config-
uration supports
only Single display.
Clone Mode
Clone Mode simply shows an exact copy of the Primary display desktop on the other dis-
play(s). This mode will drive multiple displays with the same content.
Dualview Mode
Dualview Mode treats both connected displays as separate devices, and they act as a vir-
tual desktop resulting in a large workspace. When Dualview is enabled, you can drag any
icons or windows across to the other display desktop. It is therefore possible to have one
program visible in one of the displays, and a different program visible in the other display.
Blu-ray/HD-DVD Support
If your optical device drive option includes a Blu-ray/HD-DVD device, please note the following:
The GeForce Go 7950 GTX video card DOES NOT support HDCP (high-bandwidth digital-content protection), and therefore will not
play content through the DVI-Out port or S-Video Out Jack on the computer. If you wish to display content from the Blu-ray/HD-
DVD device on an external display, then use External Monitor Port to connect the computer to the external display using Single or
Dualview display modes (do not use Clone mode).