Eurocom D90xC PHANTOM-X - Manual (Page 159)

NVIDIA Video Driver Controls
Attaching Other Displays B - 9
B
Configuring an External Display using the NVIDIA Control Panel
Alternatively you can use the NVIDIA control panel to configure any attached dis-
plays.
1. Attach your external display to the external monitor port/DVI-Out Port (or TV to the
S-Video-Out jack), and turn it on.
2. Go to NVIDIA Control Panel (see “NVIDIA Control Panel” on page B - 2 ).
3. Double-click Display, and then click Set up multiple displays.
4. Click to select the nView display mode you wish to use (see page B - 10 ).
5. Select the display(s) you want to use (if your display is not shown click “My Display
is not shown in the list...”), and choose which display is to be the primary display.
6. Click Apply > Yes to save the changes.
SLI Configuration &
Multiple Displays
Note that if SLI configu-
ration is enabled only a
Single display may be
used as the display de-
vice.
Figure B - 6
Set Up Multiple
Displays