The power-on self test (post), The power-on self test (post) -2, Bios utilities 5 - 2 the power-on self test (post) – Eurocom M570U DIVINE User Manual

Page 78: Figure 5 - 1

BIOS Utilities

5 - 2 The Power-On Self Test (POST)

The Power-On Self Test (POST)

Each time you turn on the computer, the system takes a few seconds to conduct a
POST, including a quick test of the on-board RAM (memory).

As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run Setup.

If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can’t get into Setup without rebooting.

POST Screen

1.BIOS information
2.CPU type
3.Memory status
4.Enter Setup prompt

appears only during
POST

Note: The POST screen
as pictured is for guide-
line purposes only.

Figure 5 - 1

POST Screen

Phoenix TrustedCore(tm) NB

BIOS Revision: 1.01.06

KBC/EC Revision: 1.00.04

CPU = 1 Processor Detected, Cores per Processor = 2

Intel(R) Core(TM)2 CPU

T7200 @ 2.00GHz

1024M System RAM Passed

4096 KB L2 Cache

System BIOS shadowed

Video BIOS shadowed

Fixed Disk 0: TOSHIBA MK6034GSX

ATAPI CD-ROM: PIONEER DVD-RW DVR-K16RS

Mouse intialized

Press to enter SETUP