Eurocom M570U DIVINE User Manual
Page 190
Windows XP Information
D - 36 Setting Up SATA RAID
D
19. Specify the RAID level (RAID 0 or RAID 1 - see
Table D - 4, on page D - 34
) and then press Tab or
Enter to advance to the next field.
20. Press Enter and the system will select the physical
disks to use.
21. Press Enter and select (if applicable) the Strip Size
(best set to default).
22. Press Enter and select the Capacity size (best set
to default).
23. Press Enter to Create Volume.
24. Confirm the selection by pressing Y.
25. This will now return to the main menu.
26. Select 4.Exit and press Enter, then press Y to exit
the RAID configuration menu.
27. As the computer starts up, press a key when you see
the message "Press any key to boot from CD".
28. Press the F6 key when you see the message
“Press F6 if you need to install third party
SCSI or RAID driver”.
29. When the Windows Setup menu appears (Windows
will load a number of files before the Setup menu
appears), press the <S> key to "Specify Additional
Device".
30. Insert the SATA RAID driver diskette into the
external USB floppy drive, and press Enter.
31. Use the arrow keys to scroll down and select
Intel(R) 82801GHM SATA RAID Controller
(Mobile ICH7MR/DH), and press Enter.
Figure D - 19
- SATA RAID Controller - Mobile
ICH7MR/DH
32. The system will now read from the floppy disk drive
and then return to the Windows Setup menu.
33. Press Enter to continue installing the operating
system as normal (see your Windows
documentation if you need help on installing the
Windows OS).
34. Install the Windows drivers as per
Intel(R) ESB2 SATA RAID Controller (Server ESB2)
Intel(R) ESB2 SATA AHCI Controller (Server ESB2)
Intel(R) 82801GHM SATA RAID Controller (Mobile ICH7MR/DH)
Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)