Eurocom M570U DIVINE - Manual (Page 102)

Modules
7 - 2 Wireless LAN Module
7
Wireless LAN Module
If you have included an Intel PRO/Wireless 3945ABG (802.11a/b/g) PCIe
WLAN module or 802.11 b/g USB WLAN module in your purchase option, make
sure that the Wireless LAN module is on before installing the driver. Use the Fn +
F11 key combination (see
Table 1 - 4, on page 1 - 9 ) to toggle power to the Wire-
less LAN module (when the WLAN module is on, the LED will be green). Make
sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
Intel WLAN Driver Installation
1.
Make sure the module is powered on, and then insert the Device Drivers &
Utilities + User’s Manual CD-ROM into the CD/DVD drive.
2. Click Optional, and then click 1.Wireless Lan > Yes.
802.11 b/g WLAN Driver Installation
1.
Make sure the module is powered on, and then insert the Device Drivers &
Utilities + User’s Manual CD-ROM into the CD/DVD drive.
2. Click Optional, and then click 1.Wireless Lan > Yes.
3. Click 1.Install WLAN Driver > Yes.
4. Click Finish to complete the installation.
Note: The operating system is the default setting for Wireless LAN control in Win-
dows Vista (see overleaf).
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination to toggle power to
the WLAN module, and
check the indicator to see if
the module is powered on
or not (see
Table 1 - 2, on
page 1 - 7 ).