Eurocom M570U DIVINE User Manual
Page 118
Modules
7 - 18 Setting Up SATA RAID
7
9.
Select 1.Create RAID Volume and press Enter.
10. Type the RAID volume name and then press Tab or Enter to advance to the next
field.
11. Specify (use the up and down arrow keys) the RAID level (RAID 0 or RAID 1 - see
Table 7 - 1, on page 7 - 16
and sidebar) and then press Tab or Enter to advance
to the next field.
12. Press Enter and the system will select the physical disks to use.
13. Press Enter and select (if applicable) the Strip Size (best set to default).
14. Press Enter and select the Capacity size (best set to default).
15. Press Enter to Create Volume.
16. Scroll down to Create Volume and press Enter to create the volume.
17. Confirm the selection by pressing Y.
18. This will now return to the main menu.
19. Select 4.Exit and press Enter, then press Y to exit the RAID configuration menu.
20. As the computer starts up, press a key when you see the message "Press any
key to boot from CD".
21. Press Enter to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
22. Install the Windows drivers as per
.