Eurocom M570U DIVINE - Manual (Page 107)

Modules
PC Camera Module 7 - 7
7
PC Camera Module
If you have included the PC Camera module in your purchase option, you will have
the appropriate software provided on the
Device Drivers & Utilities + User’s Man-
ual CD-ROM .
Before installing the driver, make sure the PC Camera is on. Use the Fn + F10 key
combination (see
Table 1 - 4, on page 1 - 9 ) to toggle power to the PC Camera
module (when the PC Camera module is on, the LED will be green). Make sure
you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
PC Camera Driver Installation
1.
Make sure the module is powered on, and then insert the Device Drivers &
Utilities + User’s Manual CD-ROM into the CD/DVD drive (click Cancel
if you see a
“New Hardware Found” message) .
2. Click Optional > Yes, and then click 2.PC Camera, Web cam > Yes.
3. Choose the language you prefer and click Next.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Run the BisonCap application program from the shortcut on the desktop, or
from the BisonCam item in the Start > Programs/All Programs menu (if
the hardware is turned off use the Fn + F10 key combination to turn it on
again).
Latest PC Camera
Driver Information
Check the PC Camera
CD, and any accompa-
nying insert pages, for
the latest updated infor-
mation on the PC Cam-
era driver, which may
override the information
provided here.