Eurocom D900K F-Bomb - Manual (Page 86)

BIOS Utilities
5 - 10 Advanced Menu
5
Card Reader: (Advanced Menu > Advanced Chipset Control)
This option allows you to enable/disable support for the 10-in-1 Card Read-
er. and is “Enabled” by default. However if you are installing an operating
system (e.g. Windows XP) it is recommended that you disable the card
reader, as otherwise the card reader slots will automatically be defined as
drives “C:” through “F:” (your hard disk drive will then be defined as
drive “G:” etc.). If you set this option to “Disabled” in order to install the op-
erating system, don’t forget to reset the option to “Enabled” after you have
installed the operating system.
Display Time on LED (Advanced Menu > Advanced Chipset Control)
This option allows you to toggle the time display on the Audio "DJ" LED dis-
play.
I/O Device Configuration (Advanced Menu)
The sub-menus under this item include options to configure the Serial port A
(Serial Mouse), Serial port B (Infrared) and Parallel (Printer) port. These
can be left to the default settings, however you may wish to use certain devices
that require settings to be adjusted accordingly. Check the documentation for
any such devices to see what settings are required.