Eurocom D900K F-Bomb User Manual
Page 137
Troubleshooting
Problems & Possible Solutions 8 - 11
8
The
Wireless LAN/
Bluetooth/ modules
cannot be detected.
The modules are off. Check the LED indicator
to see if the modules are on or off
(see
“LED Indicators” on page 1 - 6
). If the LED indicator is off, then press the
appropriate AP-Key button in order to enable the modules (see
The
Wireless LAN/
Bluetooth/ modules
cannot be configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the
driver for the appropriate module (see the instructions in
for the
appropriate module).
The
PC Camera
software displays a
black screen when the
EMAMCAP software is
run.
The software is using the incorrect device. If you have both the optional PC Camera and TV
Tuner modules present, make sure you install the TV Tuner driver and application first. After
installing the PC Camera driver you will need to select which device to use with the EMAM-
CAP program. Go to the Devices menu in the EMAMCAP program and select the USB2.0
1.3M PC CAM device. (see
“PC Camera & TV Tuner” on page 7 - 16
).
Problem
Possible Cause - Solution