The power-on self test (post), The power-on self test (post) -2, Bios utilities 5 - 2 the power-on self test (post) – Eurocom D900K F-Bomb User Manual
Page 78: Figure 5 - 1
BIOS Utilities
5 - 2 The Power-On Self Test (POST)
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to con-
duct a POST, including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong.
If there is a problem that prevents the system from booting, it will display a
system summary and prompt you to run Setup.
If there are no problems, the Setup prompt will disappear and the system will
load the operating system. Once that starts, you can’t get into Setup without
rebooting.
POST OR Phoenix
Firstware Screen
If you have disabled
the Boot Diagnostic
Screen the POST
screen will not appear
(see page
), and
the Firstware Screen
will appear instead.
Figure 5 - 1
POST Screen
Phoenix cME(tm) TrustedCore(tm) NB
Copyright 1985-2004 Phoenix Technologies Ltd.
All Rights Reserved
BIOS Revision: D900K 1.00.D0AT2
KBC/EC Firmware Revision: 1.00.D5
VGA Card: Nvidia NV42GLM
VBIOS Revision: 5.41.02.39.32-03/10/05
CPU = AMD Athlon(tm) 64 Processor 3000+
623K System RAM Passed
511M Extended RAM Passed
512K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
Fixed Disk 0: FUJITSU MHT2040AT
Fixed Disk 1: FUJITSU MHT2040AT
ATAPI CD-ROM: TSSTcorpCDW/DVD TS-L462A
Mouse intialized
Press
1
2
3
4
POST Screen
1.BIOS information
2.CPU type
3.Memory status
4.Enter Setup prompt appears
only during POST
Note: The POST screen as pic-
tured is for guideline purposes
only.