Eurocom D900K F-Bomb - Manual (Page 45)

Storage Devices, Mouse, Audio & Printer
Configuring the Infrared Settings for FIR 2 - 9
2
Configuring the Infrared Settings for FIR
To configure your computer for Fast Infrared (FIR) communication follow
these steps:
1. Click Start, point to Settings and click Control Panel (or just click Start >
Control Panel).
2. Double-click Wireless Link (Printers and Other Hardware Category) icon.
3. Click Hardware (tab), and click the Properties button, then click the
Advanced (tab).
4. Select “Infrared Transceiver A” and change the Value to “HP HSDL-
2300/3600”.
5. Click OK > OK.
6. Restart the computer if prompted to do so.
You can change the infrared transceiver mode (serial port B) from the BIOS
settings (see
“I/O Device Configuration (Advanced Menu)” on page 5 - 10 ).
For further information, please refer to the manual of the device you wish to
connect.
Infrared
Communication
The infrared transceiv-
er operates on a “Line
of Sight”.
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.